(3) SET 1STD + 1.003 + .006 Mavic Crossmax Freehub Bushings -/hub/ bearing Wheel

Description

This auction is for
3
bushings, a Standard size, a .003 oversize and a .006 super oversize,.
(freehub not included)
WCM
producuts are made in the
U
S
A!!!
This is a long awaited product that answers the prayers of many Crossmax wheel owners.
Finally a simple bushing (made in the USA) you can replace rather than having to buy an entire new free hub.  This nylon bushing simply pushes down and then snaps into place where the old nylon bushing now exists,
Our bushing requires no special tools unlike others you may find that require special tools or a vice to install.
Even bet
ter there is an
oversize version
to help tighten up the the rear cassette on a well used wheelset. The hub itself actually slowly wears and after time even a new cassette body will feel loose requiring a whole new hub.
This bushing is .0035 tighter clearance then a factory
one is
. This works great for a wheelset with over  6000 miles on it, or with less miles in harsh conditions . It makes it feel as tight as a new one, which means better power transfer and cleaner more positive shifting.
There is a Super oversize for wheels that are badly worn. It is the tightest bushing you can use.
Then there is a STD size for wheels with very little wear, it is the same size as the one that your wheel came with new.
Our bushings are made from a
SELF LUBRICATED MATERIAL
t
hat will
extend your service intervals
. It has a
PV16,000
(the higher the better),
wear factor (K) 4
(the lower the better)
coefficient to friction .12,
moisture absorption .5
This bushing fits
:
FTS-L
and
FTS-X
hubs which are found on all top of the line mavic wheels from very early 2000's through current. Some include
Crossmax :SL, ST , SX, SLR, XL , Mavic Ksyrium, Cosmic, Carbone, Helium ,Classics Pro, Mavic 29er, Crossland, Crossride
. Any road bikes or mountain bikes with the FTS-L or FTS-X hubs will also work.
If you are unsure if your current bushing is getting worn, wiggle the cassette back and forth. If it moves more the the width of a nickle it is getting worn to the point where shifting performance will start to suffer.
Don't confuse our bushing with other ones. Our bushing is made with a very high tolerance unlike our competition who states
:
you may have to sand their bushing to get a proper fit so the freehub will spin freely.
This action is for the nylon bushing only!!  The
freehub
in the first pic is to show fit only, it is
not included!!
Interested dealers please contact us for bigger savings on larger quantities.
Any questions please mail me.
thanks,
WCM