Smart Kapp KAPP84 84" Capture Board

Description

Overview The SMART kapp® 84 board enables you to collaborate with others in a simple but powerful way. Write and draw on the board like you would a regular dry erase board. You can then connect a Bluetooth®-enabled mobile device to the board by scanning a Quick Response (QR) code or by tapping the Near Field Communication (NFC) tag. When you first connect your mobile device, you’re directed to the Apple App Store or Google Play™ to download the SMART kapp app. After you download and install the app, you can use it to connect to your board and share content with others.
Included parts
SMART kapp 84 board
Dry erase marker (×6)
Eraser
Brackets and hardware for mounting the board to a wall
Power supply with international plugs
Digital capture technology
DViT
(Digital Vision Touch) technology
Wireless technology
Bluetooth
4.0 Dual Mode (backwards compatible with Bluetooth 2.1 + EDR)
Capture options
Establish a Bluetooth wireless connection with a supported mobile device (see below) by doing one of the following:
Scan the board’s unique QR code
Tap the board’s NFC tag (
Android
devices only)
Connect a USB drive
USB drive support
USB 2.0 Type-A receptacle (support for FAT-formatted USB drives only)
User support
Supports two users drawing at the same time
Frame finish
Bright White
Apple devices
iOS 8.1 or later operating system software
50 MB of storage
iPhone 4S or later
Third generation iPad or later
First generation iPad mini or later
Fifth generation iPod touch or later
Android devices
Android 4.4.4 (KitKat) or later operating system
50 MB of storage (internal or SD card)
1024 MB of RAM
720p or better screen resolution
Bluetooth 2.1 + EDR
NFC (recommended)
3 megapixel or better rear-facing camera (recommended)
Mobile devices
Safari for iOS 8.1 or later operating system software
Chrome
for Android 39.0.2171.93 or later
Desktop
Internet Explorer
10 or later
Chrome 39.0.2171.95 or later
Firefox
34.0.5 or later
Safari 8.0 or later
Options
Included mounting bracket
Standard
VESA
600 mm × 400 mm mounting bracket (not included)
Recommended height
76" (193 cm) from the floor to the middle of the included mounting bracket
Bolt requirements for VESA mounting bracket
Size
M6
Maximum length
To avoid damage to the board, ensure the bolt is no longer than 1/2" (1.2 cm) plus the width of the washer (a) and the width of the bracket (b)
Power requirements
100 V to 240 V AC, 50Hz to 60Hz
Power consumption at 77°F (25°C)
15 W (maximum)
Power cable
7' 10 1/2" (2.4 m) power cable
Storage
Temperature
-40–140°F (-40–60°C)
Humidity
5–95% relative humidity, non-condensing
Operating
Temperature
41–95°F (5–35°C)
Humidity
10–80% relative humidity, non-condensing