Viofo HK4 3-Wire Kit for the T130/A119Mini/A229 (Optional Tap-A-Fuse kit)

Description

Viofo HK4 3-Wire Kit for the T130/A119Mini/A229 (Optional Tap-A-Fuse kit)
Viofo HK4 3-Wire Kit for the T130/A119Mini/A229 (Optional Tap-A-Fuse kit)
This is the Viofo HK4 3-wire hardwire kit specifically for the T130, A119 Mini and A229 DUO dash cameras. The plug is a Type-C USB. This kit is required if you want the camera to automatically and instantly enter parking mode once the vehicle engine has been shut off.
4 voltage cutoff selection points - 12.4V, 12.2V, 12V and 11.8V (24.8V, 24.4V, 24V and 23.6V if your vehicle has a 24V system).
The overall length of the kit is about 13 feet (4 meters).  From the tap ends of the red, yellow and black wires (where they tap into the fuse box) to the converter box is about 3.25 feet.  From the converter box to the miniUSB plug is about 9.8 feet
**
There are 5 options to choose from.  You can purchase the 3-wire kit only or with any of the 4 Tap-A-Fuse kits we carry.  If you order with a Tap-A-Fuse kit, you will receive the Viofo 3-wire hardwire kit plus 2 of the Tap-A-Fuse wire kits of your fuse type, as the Viofo 3-wire kit requires you to tap into 2 different fuses in your vehicles fuse box.  Each Tap-A-Fuse wire with come with a 5A fuse.
Please be sure to know exactly which fuse type your vehicle has before ordering this hardwire kit with a Tap-A-Fuse kit.  We try to be as accurate as possible with fuse types, but there are many different types and names which tend to change depending on which resource your using.  Please see the picture below to identify your fuse type.  This is how we have labeled our Tap-A-Fuse kits.  Please contact Capture Your Action if you have any questions before purchasing.
Shipping is free when purchased with a dash camera.
**
All three wires need to be connected for the kit to function correctly.
Listing and template services provided by inkFrog